Pool Steps

Confer Curve Step (Deck Mounted)

699.99

Ocean Blue 30in Wide Step

489.99

Get the pool step that makes mighty good sense! Graceful design with curved steps, scalloped sides and textured risers. Simple snap together assembly with minimal parts.

Graceful design with curved steps, scalloped sides and textured risers. Simple snap together assembly with minimal parts. Wide, flat steps with non-slip texture. Mounts easily to your deck or pool – brackets included. Side Openings allows for water circulation.

Pool Steps

Two handrails for safety and stability while entering and exiting pool. Fits above ground pools 48” to 54” with flat bottoms. A step pad is recommended to protect liner. Meets all current ANSI/APSP standards

Design Graceful design with curved steps,scalloped sides and textured risers
Easy Assembly Simple snap together assembly with minimal parts
Weight Guidlines 400lbs
Steps Wide, flat steps with non-slip texture
Mounts to Deck or Pool Yes
Brackets Included Yes
Side Openings allow for water circulation
Safety Two handrails for safety and stability while entering and exiting pool
Sand Requires 50lbs of sand

Pool Steps

Design Graceful design with curved steps, scalloped sides and textured risers
Assembly Simple snap together assembly with minimal parts
Steps Wide, flat steps with non-slip texture
Mounting Mounts easily to your deck or pool – brackets included
Side Openings Allows for water circulation
Handrails Two handrails for safety and stability while entering and exiting pool
Compatibility Fits above ground pools 48” to 54” with flat bottoms
Step Pad A step pad is recommended to protect liner
Certifications Meets all current ANSI/APSP standards
Requires 50lbs of sand To prevent step from floating

Pool Steps

Adding Chlorine To Your Pool
You should be Adding Chlorine To Your Pool if the total alkalinity is at the right level and pH is correct. The amount of chlorine to add depends on the present chlorine level and the type of chlorine used. Refer to the manufacturers instructions for quantity.

As discussed previously, chlorine degrades rapidly under the influence of UV light. For this reason chlorine should be added only in the late afternoon or early evening. Adding chlorine then will insure it can dissolve and mix thoroughly before the damaging sun’s rays can affect it.

Adding Chlorine To Your Pool

You should evenly scattered/ poured the chlorine around the pool or over slowly in front of the return flow jets to ensure rapid and even distribution.

Chlorine should be kept at a level of 1.0-3.0 ppm to ensure sufficient sanitation. If you are using a Pool Wizard, a level of 0.5 ppm is required. This combination will provide a far superior sanitation to chlorine alone.

If the pool has very high levels of contamination or there is a strong smell of chlorine around the pool, you may need to shock treat the water. This involves adding large quantities of non-stabilized chlorine (or non-chlorine oxidizers) to the pool. Doing this rapidly destroys any offending matter in the water.

Occasionally add water to your pool

If your swimming pool needs topping up, now is the ideal time to put the hose in the pool. Replace the water in your pool bit by bit is very healthy for your pool. This will prevent it becoming stale and creating chemical problems or pool water problems. If you do a 5-minute backwashing followed by a 1-minute rinse every week you will replace about 5% of the swimming pool water each month. This means a complete changeover of swimming pool water approximately every 2 years.

REMEMBER too, that the useful lifespan of the sand in your filter is 3-5 years. If you neglect to change the sand, your filter will not be able to remove the finer particles. Have the pool filter opened for inspection at least every 2 years to avoid filtration problems.

Paradise Pools Mart – Adding Chlorine To Your Pool

Poolife Care Guide

Disclaimer: The information provided by our how to guide is for example only. please refer to manuals for complete information