Ocean Blue A Frame Ladder

$499.99

Product Details

The Ocean Blue A-Frame Ladder is built to last. It uses minimal hardware for easy assembly. Designed to fill with water, the A-Frame ladder requires no additional weights. It comes with a simple lift and lock feature for easy assembly and includes a padlock for extra safety. The Ocean Blue A-Frame has a 300 pound capacity and easily adjusts to fit above ground pools up to 56′. With safety in mind, the A-Frame Ladders outer steps can slide up and lock in place, protecting from unwanted entry.

Ocean Blue A Frame Ladder

Placing A-Frame Ladder in Pool
CHOOSE A LOCATION THAT IS LEVEL AND IN FULL VIEW.
POOL MUST HAVE COMPETENT ADULT SUPERVISION AT ALL TIMES WHEN IN USE.

Tools Needed: Cordless drill with Phillips bit.
#1: Carefully lift the ladder over the pool wall
making sure the Swing Ladder is on the outside
of the pool. Be careful not to damage liner or
pool wall. The platform must be level should
rest on the pool top seat and the bottom tread
should rest firmly on the pool bottom. Depending on the outside height of the swimming pool
ledge, rail boots may need to be readjusted at
this time. Use of a ladder pad is highly
recommended to protect pool liner.

#2: Tip the ladder sideways to allow the treads
to fill the water. This will prevent floating. Allow
ladder to fill with water until it settles on the
bottom of the pool. Small holes in the side rails
will let the water in. this may take a few minutes.

#3: Check to make sure the hole
locations in the platform are clear
of pool wall and supports. Drill two
5/16” holes through the Platform
and pool ledge. Fasten the ladder
platform to the pool ledge using two
¼-20 x 2-1/4” bolts, ¼-20 hex nuts.
You MUST secure the ladder to
the pool top

Ocean Blue A Frame Ladder