Ocean Blue Mighty Step 30″ and Outside Safety Ladder
$799.99 Original price was: $799.99.$749.99Current price is: $749.99.
Product Details
Ocean Blue Mighty Step 30″ and Outside Safety Ladder
Ocean Blue’s rugged step/ladder entry system is all you need to enter and exit your pool if you don’t have a deck. The Mighty Step 30″ and Outside Safety Ladder system makes getting out of your pool easy and safe.
Graceful design with curved steps, scalloped sides and textured risers. Simple snap together assembly with minimal parts. Wide, flat steps with non-slip texture. Mounts easily to your deck or pool – brackets included. Side Openings allows for water circulation.
Two handrails for safety and stability while entering and exiting pool. Fits above ground pools 48” to 54” with flat bottoms. A step pad is recommended to protect liner. Meets all current ANSI/APSP standards
Ocean Blue Mighty Step 30″ and Outside Safety Ladder
- Cleaning Your Above Ground Pool
Cleaning Your Above Ground Pool Pollution in pool water comes either from the environment or is carried into the water by the swimmers. Environmental pollution includes dust, leaves, chemical wastes, pollen, spores, bacteria and so on, that are blown into the water by the wind. Swimmers carry other pollutants into the water: sweat, suntan oils, urine, bacteria, viruses, etc.
Every swimming pool has a circulation pump and filter. The filters most common these days are sand filters, and are much easier to maintain than the earlier diatomaceous filters of a few years back. The pool pump ensures that the swimming pool water moves through the filter every day, thus removing unwanted pollutants and disinfected organic materials as quickly as possible.
Cleaning Your Above Ground Pool
Other common pool filters include DE (diatomaceous earth) filters, which are able to filter out finer particles of dirt, though they require more maintenance. Cartridge filters are also quite widespread and are quite simple to maintain. Nowadays a filter sand substitute containing zeolite is gaining in popularity. The zeolite (specifically the clinoptilolite mineral) is able to filter particles as finely as DE filters. In addition it has the capacity to absorb ammonia and its complexes (reducing combined chlorine and offensive chlorine odors), while not requiring any extra maintenance.
How Long To Run Your Pump
Generally, the swimming pool pump should run for at least 6 – 8 hours each day. There is usually a timer which cycles the pool pump on and off to ensure this constant filtration. The circulation of pool water will remove floating or suspended particles of dirt from the water, but has no effect on the substances which have settled to the bottom of the swimming pool or “stuck” to the walls.
Brush and Vacuum The Pool
Depending on the environmental conditions and swimmer load, the swimming pool needs regular brushing and vacuuming, generally about once a week in the swimming season for home pools. With the circulation pump turned off, the walls and floor of the pool are swept with a stiff brush. When the “dust” from the brushing settles, it is vacuumed off the floor of the swimming pool. The pool must also be vacuumed after treating with a flocculant. Nowadays, there is a variety of automatic swimming pool cleaners, which suck the dirt off the walls and floor of the swimming pool whenever the pool pump is running. These are really great for pool owners who never seem to have the time for swimming pool chores.
Cleaning Your Above Ground Pool
Now that the vacuuming is done, it is time to backwash the filter. Sand filters trap dust and dirt, as the name implies, in a bed of sand. When the filter has accumulated a large amount of dirt, the water cannot pass freely through the sand and the filter loses efficiency as the pressure increases. Backwashing sends water backwards through the filter and flushes the trapped dirt out. After backwashing, you will notice an increase in return pressure to the pool, and if you have a pressure guage, you should notice an increase of at least 0,5 bar.
With the pool pump off, turn the filter setting to “backwash”. Remove the leaf basket from the weir, clean and replace it. Turn on the pump and let it run until the water coming out of the waste pipe is clear. This generally needs a few minutes. Turn off the pump and set the filter to rinse; this cleans out the pipes and prevents any dirt from returning to the pool. It also settles the sand in the filter which has been stirred up by the backwashing. Run the pump for about a minute and then turn it off. Set the filter to “closed”. Open the leaf trap near the pump, remove the basket and clean out all the leaves, twigs and rubbish it may have collected. Replace the basket, set the filter to “filter” and turn your pump back to its automatic (timer) operating position.
Great! The swimming pool looks clean and the filter has been rejuvenated. Now it’s time to test the pool water and adjust the pH and chlorine levels.
Cleaning Your Above Ground Pool
If your swimming pool needs topping up, now is the ideal time to put the hose in the pool. It is very healthy for the swimming pool water to be replaced bit by bit. This will prevent it becoming stale and creating chemical problems or pool water problems. A routine of 5-minute backwashing followed by a 1-minute rinse every week will ensure that you replace about 5% of the swimming pool water each month. This means a complete changeover of swimming pool water approximately every 2 years.
REMEMBER too, that the useful lifespan of the sand in your filter is 3-5 years. If you neglect to change the sand, your filter will not be able to remove the finer particles of dirt and your swimming pool can never be completely clean. Have the pool filter opened for inspection at least every 2 years to avoid filtration problems.
Paradise Pools Mart – Cleaning Your Above Ground Pool
Disclaimer: The information provided by our how to guide is for example only. please refer to manuals for complete information
Paradise Pools Mart
Our You Tube Channel
Pool Entry Systems
Related products
-
Sale!
Waterway 100sqft Cartridge Filter System with 1.0hp Pump
0 out of 5$849.99Original price was: $849.99.$749.99Current price is: $749.99. Add To Cart -
Sale!
Aquapro 19″ Sand Filter/Pump Combo
0 out of 5$869.99Original price was: $869.99.$769.99Current price is: $769.99. Add To Cart -
Ocean Blue A Frame Ladder
0 out of 5$499.99 Add To Cart -
Confer A-Frame Evolution Safety Ladder with Barrier
0 out of 5$599.99 Add To Cart