Liberty Above Ground – Manual
Here you will find the manual and instructions for the Fijian Above Ground Pools
Liberty Above Ground Pools set up in about 2 hours (not including fill time) . Having a flat, level and firm surface is the most important consideration for these pools. If they are put on a good surface they will last for decades. Can handle kids, dogs, teens anything.
Liberty Above Ground Pools
set up in about 2 hours (not including fill time) and have special foot bracing that make them friendly to most kinds of surfaces. Having a flat, level and firm surface is the most important consideration for these pools. If they are put on a good surface they will last you for decades.
If you don’t see a size you are looking for, we can custom build one for you!- Get a Quote
Liberty Above Ground Pools Features
- Powder Coated Galvanized Steel Frame
- 32mm x 1.8 thick Steel Uprights and Feet
- 55mm x 1.8 thick Steel Top Rail
- Extra Large Boots for Stability
- 35mil 0.89mm thick Multilayer Poly Liner
- 1000 Denier
- 23 x 23 Scrim
- Inside Sky Blue Outside Navy Blue with White Top Cap
- 25 years experience making these pools.
Liberty Above Ground Pools – Paradise Pools Mart
The best of the best in the next gen style of pools. These pools are easier to put up, easier to maintain, and tough enough to handle any swimmer, including dogs. If you want at the end of the season you can take them down just as easily, but you don’t have to, they can stay up for winter.
- Adding Chlorine To Your Pool
You should be Adding Chlorine To Your Pool if the total alkalinity is at the right level and pH is correct. The amount of chlorine to add depends on the present chlorine level and the type of chlorine used. Refer to the manufacturers instructions for quantity.
As discussed previously, chlorine degrades rapidly under the influence of UV light. For this reason chlorine should be added only in the late afternoon or early evening. Adding chlorine then will insure it can dissolve and mix thoroughly before the damaging sun’s rays can affect it.
Adding Chlorine To Your Pool
You should evenly scattered/ poured the chlorine around the pool or over slowly in front of the return flow jets to ensure rapid and even distribution.
Chlorine should be kept at a level of 1.0-3.0 ppm to ensure sufficient sanitation. If you are using a Pool Wizard, a level of 0.5 ppm is required. This combination will provide a far superior sanitation to chlorine alone.
If the pool has very high levels of contamination or there is a strong smell of chlorine around the pool, you may need to shock treat the water. This involves adding large quantities of non-stabilized chlorine (or non-chlorine oxidizers) to the pool. Doing this rapidly destroys any offending matter in the water.
Occasionally add water to your pool
If your swimming pool needs topping up, now is the ideal time to put the hose in the pool. Replace the water in your pool bit by bit is very healthy for your pool. This will prevent it becoming stale and creating chemical problems or pool water problems. If you do a 5-minute backwashing followed by a 1-minute rinse every week you will replace about 5% of the swimming pool water each month. This means a complete changeover of swimming pool water approximately every 2 years.
REMEMBER too, that the useful lifespan of the sand in your filter is 3-5 years. If you neglect to change the sand, your filter will not be able to remove the finer particles. Have the pool filter opened for inspection at least every 2 years to avoid filtration problems.
Paradise Pools Mart – Adding Chlorine To Your Pool
Disclaimer: The information provided by our how to guide is for example only. please refer to manuals for complete information