Menu Close

What am I looking at for time and money for pool maintenance?

What am I looking at for time and money for pool maintenance?

What am I looking at for time and money for pool maintenance

Below are the considerations for pool maintenance

Sanitizing the Pool

There are several options here

1.  Chlorine Treatment, which will run you about 30-40 dollars a week on powder shock and chlorine Tabs.  Occasional purchasing of testing supplies

2. Salt Water system  $600.00 Initial outlay and @ 20 dollars a month on salt.  _ This is still a chlorine based system, but you do not have to buy or store or add Chlorine, just salt when needed. This is an automatic system no testing for chlorine levels needed-

3 Copper Silver Ion Water Purifier. This is our recommended go to, initial cost is $500.00 and then maybe 10 dlaars for the one table spoon of powdered shock you have to add each week. This is 99% chemical free, great for dogs, no chlorine irritations Replace Diode every few years $40.00

With both the salt and the Ion the major cost outlay is paid only one, and the cost of sanitizing the pool goes way down in the following years

With all pools you will have to test the pH once a week (test strips included with ionizer)

Here is a quick video over view of the three systems

What am I looking at for time and money for pool maintenance?


There are three options here

1. Sand Filter.  While it does not filter down to the finest micron level, it is by far the easiest to maintain just backwash the dirt out of the system once a week and you are good to go

2. Diatomaceous earth filter.  The very best micron filtration, but a maintenance headache

3 Cartridge filter system. Mid range both in filtration and maintenance

We recommend the Sand Filters for Dog Pools. If you want finer filtration you can use a product like Zeo Sand,  which is a special sand that filters almost as well as the DE filter

Sand filters will go longer in between cleaning as the others as they have more filter material  but each will have to me maintained ever 1-2 weeks depending on the amount of particulate matter being filtered

The Diatomaceous Earth filter is a $300.00 upgrade

Below is a video

What am I looking at for time and money for pool maintenance?

Cleaning Walls and bottom

There are two ways to accomplish this

Manual maintenance, including vacuuming, and brushing pool floor and bottoms 2-3 hours a week

Automatic Pool Cleaner, will automatically clean and brush bottom and sides, when you are not using the pool

So the Optimum Package would include A Sand Filter, Automatic Pool Cleaner and Ionizers. They will save you time and money

What am I looking at for time and money for pool maintenance?


  • Cleaning Your Above Ground Pool

    Cleaning Your Above Ground Pool Pollution in pool water comes either from the environment or is carried into the water by the swimmers. Environmental pollution includes dust, leaves, chemical wastes, pollen, spores, bacteria and so on, that are blown into the water by the wind. Swimmers carry other pollutants into the water: sweat, suntan oils, urine, bacteria, viruses, etc.

    Every swimming pool has a circulation pump and filter. The filters most common these days are sand filters, and are much easier to maintain than the earlier diatomaceous filters of a few years back. The pool pump ensures that the swimming pool water moves through the filter every day, thus removing unwanted pollutants and disinfected organic materials as quickly as possible.

    Cleaning Your Above Ground Pool

    Other common pool filters include DE (diatomaceous earth) filters, which are able to filter out finer particles of dirt, though they require more maintenance. Cartridge filters are also quite widespread and are quite simple to maintain. Nowadays a filter sand substitute containing zeolite is gaining in popularity. The zeolite (specifically the clinoptilolite mineral) is able to filter particles as finely as DE filters.  In addition it has the capacity to absorb ammonia and its complexes (reducing combined chlorine and offensive chlorine odors), while not requiring any extra maintenance.

    How Long To Run Your Pump

    Generally, the swimming pool pump should run for at least 6 – 8 hours each day. There is usually a timer which cycles the pool pump on and off to ensure this constant filtration. The circulation of pool water will remove floating or suspended particles of dirt from the water, but has no effect on the substances which have settled to the bottom of the swimming pool or “stuck” to the walls.

    Brush and Vacuum The Pool

    Depending on the environmental conditions and swimmer load, the swimming pool needs regular brushing and vacuuming, generally about once a week in the swimming season for home pools. With the circulation pump turned off, the walls and floor of the pool are swept with a stiff brush. When the “dust” from the brushing settles, it is vacuumed off the floor of the swimming pool. The pool must also be vacuumed after treating with a flocculant. Nowadays, there is a variety of automatic swimming pool cleaners, which suck the dirt off the walls and floor of the swimming pool whenever the pool pump is running. These are really great for pool owners who never seem to have the time for swimming pool chores.

    Cleaning Your Above Ground Pool

    Now that the vacuuming is done, it is time to backwash the filter. Sand filters trap dust and dirt, as the name implies, in a bed of sand. When the filter has accumulated a large amount of dirt, the water cannot pass freely through the sand and the filter loses efficiency as the pressure increases. Backwashing sends water backwards through the filter and flushes the trapped dirt out. After backwashing, you will notice an increase in return pressure to the pool, and if you have a pressure guage, you should notice an increase of at least 0,5 bar.

    With the pool pump off, turn the filter setting to “backwash”. Remove the leaf basket from the weir, clean and replace it. Turn on the pump and let it run until the water coming out of the waste pipe is clear. This generally needs a few minutes. Turn off the pump and set the filter to rinse; this cleans out the pipes and prevents any dirt from returning to the pool. It also settles the sand in the filter which has been stirred up by the backwashing. Run the pump for about a minute and then turn it off. Set the filter to “closed”. Open the leaf trap near the pump, remove the basket and clean out all the leaves, twigs and rubbish it may have collected. Replace the basket, set the filter to “filter” and turn your pump back to its automatic (timer) operating position.

    Great! The swimming pool looks clean and the filter has been rejuvenated. Now it’s time to test the pool water and adjust the pH and chlorine levels.

    Cleaning Your Above Ground Pool

    If your swimming pool needs topping up, now is the ideal time to put the hose in the pool. It is very healthy for the swimming pool water to be replaced bit by bit. This will prevent it becoming stale and creating chemical problems or pool water problems. A routine of 5-minute backwashing followed by a 1-minute rinse every week will ensure that you replace about 5% of the swimming pool water each month. This means a complete changeover of swimming pool water approximately every 2 years.

    REMEMBER too, that the useful lifespan of the sand in your filter is 3-5 years. If you neglect to change the sand, your filter will not be able to remove the finer particles of dirt and your swimming pool can never be completely clean. Have the pool filter opened for inspection at least every 2 years to avoid filtration problems.

    Paradise Pools Mart


    Paradise Pools Mart – Cleaning Your Above Ground Pool

    Poolife Care Guide

    Disclaimer: The information provided by our how to guide is for example only. please refer to manuals for complete information

Paradise Pools Mart

Paradise Pools Mart
Our You Tube Channel